Adaptec 6405E Installation And User Manual page 67

Type the following commands to begin loading the driver:
5
mkdir /mnt2 /AACRAID
mount /dev/sda1 /mnt2
cp -R /mnt2/* /AACRAID
umount /mnt2
Copy the driver file to the /lib/modules directory:
6
cp -f /AACRAID/aacraid.ko-PRE_MOD /lib/modules/2.6.<version>-generic/kernel/
drivers/scsi/aacraid/aacraid.ko
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
Remove the USB drive.
7
Install the loadable module:
8
insmod /lib/modules/2.6.<version>-generic/kernel/drivers/scsi/aacraid/
aacraid.ko
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
Press CTRL+ALT+F1 to switch back to the installation screen, then follow the on-screen
9
prompts to continue the installation.
When prompted to reboot the system, press CTRL+ALT+F2 to switch to the console. Do
10
not reboot!
Type the following commands to complete the driver installation:
11
For Ubuntu 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.<version>-generic-
pae/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.<version>-generic-pae
update-initramfs -u -v
exit
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
For Ubuntu 64-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD /target/lib/modules/2.6.<version>-server/
kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.<version>-server
update-initramfs -u -v
exit
where <version> is 32-24 for Ubuntu 10.x and 38-8 for Ubuntu 11.x.
Press CTRL+ALT+F1 to switch back to the installation screen, then reboot.
12
Continue with Managing Your Storage Space on page
13
Chapter 7: Installing the Driver and an Operating System
79.
66
●