Input Channel Banks - Behringer X32 DIGITAL MIXER User Manual

13
X32 DIGITAL MIXER Preliminary User Manual

2.2 Input Channel Banks

(9)
(8)
(10)
(11)
(12)
(13)
(7)
(14)
(7) LAYER SELECT – Select either the channels 1-16, channels 17-32,
Aux In/USB/FX Returns, or Bus Masters layer with these 4 buttons.
The currently active layer will light.
(8) DAW REMOTE – Press this to enable DAW remote control.
(9) SELECT – Press this button to select an input or bus (depending which layer
is active) and allow it to be edited by the Channel Strip and Main Display.
(10) CHANNEL METER – This displays the signal level of the input or bus
(depending which layer is active). The Gate and Comp LEDs light to indicate
that noise gate and/or compression are active.
(11) SOLO – Press this button to send the channel to the Solo Bus.
(12) MINI DISPLAY – Information such as channel number,
nickname, input source and graphical icon are displayed on this
color LCD screen.
(13) MUTE – Press this button to mute the channel.
(14) FADER – Use this to adjust the channel volume or bus send in 'Sends on
Faders' mode. The faders will automatically display the current status as
layers and functions are changed.