Behringer B-CONTROL FADER BCF2000 User Manual page 8

8
B-CONTROL FADER BCF2000/ROTARY BCR2000 User Manual
(2)
BCR2000
Fig. 3.1: The control surface of the B-CONTROLs
(13)
(14)
Fig.3.2: The back of the BCF2000 (control elements (13) to (17) coincide with the BCR2000)
(6) Permanently fixed functions are assigned to this key section:
STORE saves presets.
LEARN gets you to the LEARN mode.
EDIT gets you to the EDIT mode.
Using the EXIT key, you exit a programming level (edit mode / global setup).
Use it also to cancel a store or copy procedure.
(1)
(10)
(7)
BCF2000
OUT B / THRU
(15) (16)
B – CONTROL
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK
BCF2000
DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS
INSIDE: REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. USB • MIDI • FADER
OUT A IN CONTROLLER
(17) (12)
(7) The eight 100-mm faders of the BCF2000 are freely assignable for controlling
MIDI commands. They are motorized, so they automatically slide into the
predetermined position when you switch to another preset. If the software
you are controlling or the MIDI device to which your B-CONTROL is connected
support parameter feedback, the fader positions change automatically.
(8) Using the PRESET keys, 32 presets can be recalled. The preset number is
shown in the display.
(9) These four keys can be assigned to any MIDI command of your choice.
(3)
(4)
(5)
(6)
(8)
(9)
• CONTROLLER
BCF2000
MIDI
Behringer
Holdings (Pte)
Ltd
SWITCH
(11)