Advanced Bios Features - Gigabyte GA-H61M-S2-B3 User Manual

Manual Allows you to manually enter the specifications of the hard drive when the hard
•
drive access mode is set to CHS.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
None If no SATA devices are used, set this item to
•
detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), Large.
The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation cylinder.
Landing Zone Landing zone.
Sector Number of sectors.
Halt On
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard". (Default)
Memory
These fields are read-only and are determined by the BIOS POST.
2-5

Advanced BIOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
 Hard Disk Boot Priority
Quick Boot
CD/DVD Boot Option
First Boot Device
Second Boot Device
Third Boot Device
Password Check
HDD S.M.A.R.T. Capability
Limit CPUID Max. to 3 (Note)
No-Execute Memory Protect
Delay For HDD (Secs)
Init Display First
Onboard VGA
On-Chip Frame Buffer Size
: Move Enter: Select
F5: Previous Values
Hard Disk Boot Priority
Specifies the sequence of loading the operating system from the installed hard drives. Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <-> (or
<PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
(Note) This item is present only when you install a CPU that supports this feature. For more information
about Intel CPUs' unique features, please visit Intel's website.
Advanced BIOS Features
[Press Enter]
[Disabled]
[Auto]
[Hard Disk]
[CDROM]
[USB-FDD]
[Setup]
[Disabled]
[Disabled]
[Enabled]
(Note)
[0]
[PCIE x16]
[Enable If No Ext PEG]
[64MB+2MB for GTT]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 30 -
None so the system will skip the
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults