Pc Health Status - Gigabyte GA-P67A-UD5-B3 User Manual

2-8

PC Health Status

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Reset Case Open Status
Case Opened
Vcore
Vtt
Vcc3
+12V
Vcc
DDR15V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current POWER FAN Speed
Current SYSTEM FAN1 Speed
Current SYSTEM FAN2 Speed
Current SYSTEM FAN3 Speed
CPU Warning Temperature
CPU FAN Fail Warning
POWER FAN Fail Warning
SYSTEM FAN1 Fail Warning
higf: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
SYSTEM FAN2 Fail Warning
SYSTEM FAN3 Fail Warning
CPU Smart FAN Control
x Slope PWM
CPU Smart FAN Mode
higf: Move Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous
chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
Current Voltage(V) Vcore/Vtt/Vcc3/+12V/Vcc/DDR15V
Displays the current system voltages.
BIOS Setup
PC Health Status
[Disabled]
No
1.200V
1.100V
3.324V
12.073V
5.062V
1.536V
38 o C
35 C
o
2743 RPM
0 RPM
0 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
PC Health Status
[Disabled]
[Disabled]
[Normal]
1.75 PWM value / C
o
[Auto]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 54 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults