Gigabyte GA-P55A-UD7 User Manual page 47

tRTP
Options are: Auto (default), 1~15.
tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
B2B CAS Delay
Options are: Auto (default), 1~31.
Round Trip Latency
Options are: Auto (default), 1~255.
 Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration
CPU Vcore
x Dynamic Vcore
QPI/Vtt Voltage
>>> MCH/ICH
PCH Core
CPU PLL
>>> DRAM
DRAM Voltage
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf : Move Enter: Select
F5: Previous Values
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. This item allows you to adjust Vdroop at different levels. En-
abling Load-Line Calibration may keep the CPU voltage more constant under light and heavy CPU load.
(Default: Auto)
Standard
Level 1
Level 2
Note: Enabling Load-Line Calibration may result in damage to your CPU or reduce the useful life of the CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
This option is configurable only when CPU Vcore is set to Normal. The default is Auto.
QPI/Vtt Voltage
The default is Auto.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Voltage Settings
Normal
1.11250V
+0.0000V
1.150V
1.050V
1.800V
1.500V
0.750V
0.750V
0.750V
0.750V
0.750V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables Load-Line Calibration and sets VDroop following Intel specifications.
Enables Load-Line Calibration and slightly adjusts VDroop.
Enables Load-Line Calibration and moderately adjusts VDroop.
Current
[Auto]
[Auto]
Auto
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
F10: Save
- 47 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup