Gigabyte GA-P55A-UD7 User Manual page 124

B. S/PDIF Out
The S/PDIF Out jacks can transmit audio signals to an external decoder for decoding to get the best audio
quality.
1. Connecting a S/PDIF Out Cable:
S/PDIF Coaxial Cable
Connect a S/PDIF coaxial cable or a S/PDIF optical cable (either one) to an external decoder for transmitting
the S/PDIF digital audio signals.
2. Configuring S/PDIF Out:
On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth.
Click OK to complete.
(Note) If you have connected a S/PDIF digital audio cable (provided by expansion cards) to the 2-pin
S/PDIF Out header (SPDIF_O) on the motherboard to output digital audio to your expansion card,
you can enter the Digital Output(Optical) screen to configure further settings, such as the sample
rate and bit depth.
Appendix
S/PDIF Optical Cable
- 124 -