Adding Definity G3 Proxy Agent Nodes; Node Limitations; Adding A Proxy Agent As A Managed Node; Adding A Proxy Agent Icon - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Ad ding DEFINITY G3 Proxy Agent Nodes
Adding DEFINITY G3 Proxy Agent
Nodes
This section includes the procedure for adding a Proxy Agent as a
managed node.

Node Limitations

The number of Proxy Agent nodes that you can have on your NMS is limited
only by the total number of nodes allowed by your NMS.

Adding a Proxy Agent as a Managed Node

When you add a Proxy Agent as a managed node on the network, you can
follow your NMS's standard procedures. The following steps briefly
describe those procedures and include information specific to adding a
Proxy Agent as a node. To add a Proxy Agent as a node on the HP
OpenView NMS, complete the following procedures:
Adding a Proxy Agent icon to the network map
Configuring each Proxy Agent object

Adding a Proxy Agent Icon

Use the following steps to add a Proxy Agent icon as a node on the HP
OpenView NMS:
1. Display the appropriate network map.
2. From the menu bar, select Edit, then select Add Object.
Result: The Add Object Pallet window opens.
3. Click on the OneVision icon.
Result: The Add Object Palette window displays the following icons
under the heading Symbol Subclasses for Class OneVision: Generic, G3
PBX, and G3 Proxy.
Issue 2 April 1996
19