Advanced Memory Settings - Gigabyte GA-H55M-UD2H User Manual

 Advanced Memory Settings
Extreme Memory Profile (X.M.P.)
System Memory Multiplier
Memory Frequency (Mhz)
Performance Enhance
DRAM Timing Selectable
Profile DDR Voltage
Profile QPI Voltage
x Channel Interleaving
x Rank Interleaving
>>>>> Channel A
 Channel A Timing Settings
 Channel A Turnaround Settings
>>>>> Channel B
 Channel B Timing Settings
 Channel B Turnaround Settings
higf : Move Enter: Select
F5: Previous Values
Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance
when enabled.
Disabled
Profile1
Profile2
(Note 1)
System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
Memory Frequency(Mhz)
The first memory frequency value is the normal operating frequency of the memory being used; the
second is the memory frequency that is automatically adjusted according to the BCLK Frequency(Mhz)
and System Memory Multiplier settings.
Performance Enhance
Allows the system to operate at three different performance levels.
Standard
Turbo
Extreme
DRAM Timing Selectable (SPD)
Quick and Expert allows the Channel Interleaving and Rank Interleaving items and the memory tim-
ing settings below to be configurable. Options are: Auto (default), Quick, Expert.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.) is set to Disabled, this
item will display as 1.5V. When Extreme Memory Profile (X.M.P.) is set to Profile1 or Profile2, this
item will display the value based on the SPD data on the XMP memory.
Profile QPI Voltage
The value displayed here is dependent on the CPU being used.
(Note 1) This item appears only if you install a memory module that supports this feature.
(Note 2) This item is present only if you install a CPU that supports this feature.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

Advanced Memory Settings

(Note 1)
(SPD)
1333
(SPD)
6
(Note 2)
4
(Note 2)
(Note 2)
(Note 2)
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Disables this function. (Default)
Uses Profile 1 settings.
Uses Profile 2 settings.
Lets the system operate at its basic performance level.
Lets the system operate at its good performance level. (Default)
Lets the system operate at its best performance level.
[Disabled]
[Auto]
1333
[Turbo]
[Auto]
1.5V
1.15V
Auto
Auto
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
F10: Save
(Note 1)
- 41 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup