Cpu Vcore - Gigabyte GA-H55-UD3H User Manual

tFAW
Options are: Auto (default), 1~63.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B Misc Timing Control
Static tRD
Options are: Auto (default), 1~31.
 Advanced Voltage Settings
****** Mother Board Voltage Control ******
Voltage Types
-----------------------------------------------------------------------------
>>> CPU
Load-Line Calibration

CPU Vcore

Dynamic Vcore(DVID)
QPI/Vtt Voltage
>>> MCH/ICH
PCH Core
CPU PLL
CPU VAXG Voltage
>>> DRAM
DRAM Voltage
DRAM Termination
Ch-A Data VRef.
Ch-B Data VRef.
Ch-A Address VRef.
Ch-B Address VRef.
higf : Move Enter: Select
F5: Previous Values
>>> CPU
Load-Line Calibration
Enables or disables Load-Line Calibration. Enabling this feature adjusts Vdroop, keeping the CPU
voltage more constant under light and heavy CPU load. Disabled sets the CPU voltage following Intel
specifications. (Default: Disabled) Note: Enabling Load-Line Calibration may result in damage to your
CPU or reduce the useful life of the CPU.
CPU Vcore
The default is Auto.
Dynamic Vcore(DVID)
The default is Auto.
QPI/Vtt Voltage
The default is Auto.
>>> MCH/ICH
PCH Core
The default is Auto.
CPU PLL
The default is Auto.
CPU VAXG Voltage
The default is Auto.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Voltage Settings
Normal
1.18750V
+0.00000V
1.100V
1.050V
1.800V
1.2200V
1.500V
0.750V
0.750V
0.750V
0.750V
0.750V
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Current
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
F10: Save
- 41 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup