Internal Lan (Rj-45) Jack; E-Sata Port - Fujitsu LifeBook E751 User Manual

•
T
HE OPTIONAL INTERNAL MODEM IS DESIGNED TO THE
53000
OF
THE LINE CONDITIONS
•
T
HE INTERNAL MODEM ON ALL
U
THE NITED

Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a Gigabit
(10Base-T/100Base-Tx/1000Base-T) Ethernet LAN
connection. You may need to configure your
notebook to work with your particular network.
(Please refer to your network administrator for
information on your network configuration.) To
connect the LAN cable follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
3
Plug the other end of the cable into a LAN outlet.

e-SATA Port

e-SATA (External Serial Advanced Technology
Attachment) is an external version of SATA to connect
your computer to the hard drive. E-SATA is ideal for
backing up large files on an external hard drive.
To connect an E-SATA device:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.
BPS IS THE HIGHEST ALLOWED BY
. T
HE MAXIMUM SPEED IS
LIFEBOOK
S C . T
TATES AND ANADA
81 - Device Ports
ITU-T V.90
FCC,
AND ITS ACTUAL CONNECTION RATE DEPENDS ON
33600
BPS AT UPLOAD
F
NOTEBOOKS FROM
HE MODEM MAY BE CERTIFIED IN OTHER COUNTRIES
Figure 26. Connecting the LAN
Figure 27. Connecting an e-SATA Device
. I
STANDARD TS MAXIMUM SPEED
.
UJITSU ARE CERTIFIED FOR USE IN
.