Operating Tips; Auto Restart; Temperature And Humidity Range - Fujitsu Inverter ASTA07JEC Operating Manual

OPERATING TIPS

AUTO Restart

In Event of Power Interruption
● The power supply to the air conditioner is stopped by a
power interruption. The air conditioner will then restart
automatically in its previous mode when the power is
restored.

Temperature and Humidity Range

Outdoor temperature
Indoor temperature
● If the air conditioner is used under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the air conditioner is used under condi-
tions of lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other
damage.
● Do not use this air conditioner for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in
ordinary dwellings.
● If the air conditioner is used for many hours under high-humidity conditions about 80% or more, condensation may form on
the surface of the indoor unit, and drip onto the floor or other objects underneath.
● If a power interruption occurs during TIMER operation, the
timer will be reset and the indoor unit will begin (or stop)
operation at the new time setting. In the event that this kind
of timer fault occurs, the TIMER Indicator Lamp will flash
(see Page. 3).
● Use of other electrical appliances (electric shaver, etc.) or
nearby use of a wireless radio transmitter may cause the
air conditioner to malfunction. In this event, temporarily
disconnect the Power Supply Plug, reconnect it, and then
use the Remote Control Unit to resume operation.
Cooling Mode
About 18 to 46 °C
About 18 to 32 °C
Dry Mode
About 18 to 46 °C
About 18 to 32 °C
En-14