Table of Contents
Advertisement
RIVE CHANNEL
5
5
5
4
6
4
6
4
3
7
3
7
3
2
8
2
8
2
1
9
1
9
1
0 0
0
10
0
0
10
0
0
TREBLE
MID
BASS
M
N
O
P
U.
DEPTH- Adjusts the intensity of the chorus effect. A
lower setting will introduce a subtle yet distinct effect,
whereas a higher setting will create a more dramatic
effect. With both the RATE (Item S) and DEPTH controls
set midway or higher, a variety of vibrato/tremolo
type effects can be achieved.
V.
CHORUS INDICATOR- This LED is illuminated when the
stereo chorus is active. The color of the LED is modu-
lated red and green by the chorus sweep LFO to give
a visual indication of the sweep rate.
W.
FOOTSWITCH- Plug-in connection for remote
footswitch to switch between the Normal and Drive
channels and to activate the Stereo Chorus mode. For
proper operation of the footswitch, both DRIVE SELECT
(item Q) and CHORUS SELECT (Item T) switches should
be out. NOTE: Any good quality patch cord will work
with the remote footswitch; however, a speaker grade
cord is preferable to a coax guitar cord when it is
available.
X.
MONO FX SEND- This jack provides an unbalanced
mono output signal from the preamp at a point before
the internal CHORUS circuits. This output can be used
in conjunction with the MONO FX RETURN (Item Y) as
a patch point for mono effects devices. (SEE EFFECTS
LOOP CONNECTION DIAGRAMS.) The MONO FX
SEND can also be used to feed recording and sound
reinforcement mixers a dry signal. (For a signal with
internal CHORUS, use the STEREO FX SEND (Item Z)
jack.) Additionally this output can be used to drive
another ULTIMATE CHORUS as a slave amp. This is
done by connecting a standard guitar cord from the
MONO FX SEND jack of the master amplifier to the
MONO FX RETURN jack of the slave.
CHORUS
5
5
6
4
6
4
6
7
3
7
3
7
3
8
2
8
2
8
2
9
1
9
1
9
1
10
0
0
10
0
0
10
SELECT
REVERB
RATE
Q
R
S
T
MONO FX
5
4
6
7
8
9
0
0
10
FOOT
DEPTH
SWITCH
SEND
RETURN
U
V
W
X
Y.
MONO FX RETURN- This unbalanced jack inputs sig-
nal to the stereo chorus generating circuitry, which
drives the stereo power amp section. It automatically
disconnects the preamp and reverb circuitry when
used. This is useful when using the MONO FX option
or when using the ULTIMATE CHORUS as a slave
amplifier for a mono signal source. The CHORUS is
active in the slave so that a stereo image will be gener-
ated if it is used.
Z.
STEREO FX SEND- This jack provides an unbalanced
stereo output from the preamp, reverb and chorus cir-
cuits of the ULTIMATE CHORUS. This output can be
used in conjunction with the STEREO FX RETURN (Item
AA) as a patch point for stereo effects devices. (SEE
EFFECTS LOOP CONNECTION DIAGRAMS.) The
Stereo Effects Loop jacks are standard 1/4 inch Tip-
Ring-Sleeve types, with the left channel signal on the
tip and the right channel signal on the ring. This send
can also be used to feed a stereo signal to two chan-
nels of a recording or sound reinforcement mixer.
Additionally this output can be used to drive another
ULTIMATE CHORUS as a slave amp. This is done by
connecting a shielded stereo cord from the STEREO FX
SEND jack of the master amplifier to the STEREO FX
RETURN jack of the slave.
STEREO FX RETURN- This stereo jack inputs signal
AA.
directly to the left and right power amps. It automati-
cally disconnects the preamp, reverb and chorus cir-
cuitry when used. This is useful when using the ULTI-
MATE CHORUS as a slave amplifier for a stereo signal
source.
BB.
POWER SWITCH- Turns AC power ON and OFF.
When the switch is OFF the amplifier is completely
shut down.
STEREO FX
L
R
SEND
RETURN
AA
Y
Z
POWER
BB
Hide quick links:
Advertisement
Table of Contents
