Stereo 2-Way - dbx DriveRack PA User Manual

Section 6
26
Application Guide

6.3 Stereo 2-Way

Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack® PA+.
2. Connect the outputs of the DriveRack PA+ to the selected speaker amplifier.
3. Make sure that the mixer and power amps are turned off prior to powering up the
DriveRack PA+.
Front Panel Editing
1. From Preset mode, select factory preset #27 (Stereo 2-Way) as a template, or use the
Wizard to set up the specific preset.
2. Once the preset has been chosen, press the Data Wheel to load the preset.
Left Low
Right Low
DriveRack
Left
Right
Left High Right High
K2
Left High
Right High
Right
Self-Powered Subs
PA+
®