Stereo 3-Way With Mono Sub - dbx DriveRack PA User Manual

DriveRack

6.2 Stereo 3-Way with Mono Sub

Hardware
1. Connect the outputs from the mixer to the inputs of the DriveRack® PA+.
2. Connect the outputs of the DriveRack PA+ to the selected speaker amplifier.
3. Make sure that the mixer and power amps are turned off prior to powering up the
DriveRack PA+.
Front Panel Editing
1. From Preset mode, select factory preset #26 (Stereo 3-Way) as a template, or use the
Wizard to set up the specific preset.
2. Once the preset has been chosen, press the Data Wheel to load the preset.
Mono Low
CE 4000
PA+
®
Left Right
Right Mid
Left Mid
Left Mid Left High
Application Guide
Left High
CE 2000
Right Mid
Mono Sub
Section 6
Right High
CE 1000
Right High
25