Navigating The Eq Section; Navigating The Subharmonic Section - dbx DriveRack PA User Manual

Section 3
Navigating the "EQ Section"
To edit the parameters of the EQs used in a selected preset, simply use the following procedure. From preset mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button toggle between the input and the output EQ.
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
The EQ button
toggles through
the EQs used in
each channel of
the selected
preset menu.
Navigating the Subharmonic Synthesizer Section
From preset mode, press the SUBHARMONIC button. Pressing the Data Wheel will select the parameter to be edited.
<PREV PG
The PREV PG and NEXT PG
buttons scroll through
the pages of selected module.
10
Editing Functions

3.3 Navigating the EQ Section

EQ
GEQ
On/Off
GEQ
Flatten/Restore
or
PEQ On/Off
PEQ
Flatten/Restore
Bell,HSelf, LShelf, LHShelf,
Successive presses of the Data Wheel will toggle between
parameters within the currently selected page.

3.4 Navigating the Subharmonic Section

SUBHARMONIC
NEXT PG>
Frequency
Gain -12dB to12dB
Band 1 Freq
Gain -12dB to12dB
Q .20 to 16.0
Subharmonic - -On/Off 24-36Hz Level - 0% - 100%
Subharmonics % 0-100 36-56Hz Level - 0% - 100%
Successive presses of the Data Wheel will toggle between
parameters within the currently selected page.
DriveRack
Band 2 Freq Band 3 Freq
Gain -12dB to12dB Gain -12dB to12dB
Q .20 to 16.0 Q .20 to 16.0
PA+
®
GEQ/PEQ
SUBHARMONIC