Related Manuals for Sonic Frontiers Sonic Frontiers SFD-2
Summary of Contents for Sonic Frontiers Sonic Frontiers SFD-2
- Page 1 O W N E R ’ S M A N U A L T H E S O N I C F R O N T I E R S S F D - 2 D I G I T A L P R O C E S S O R...
- Page 2 CONTROL FUNCTIONS AND CONNECTIONS A-Phase Control Switch - This toggle switch allows the user D-D e-Emphasis Indicator LED - This LED will light when a to invert the system phasing easily and safely. When the switch pre-emphasized digital track is being played. The correct is in the 0°...
- Page 3 H -Detachable Power Cord Socket - Plug the Detachable M-Left and Right Channel Balanced XLR Audio Power Cord into this socket (see Figure 1). The SFD-2 is factory Output Connectors - These are balanced audio outputs set for the correct operating voltage for the area in which it is and should be used when connecting the SFD-2 to the sold (see shipping box for voltage setting).
- Page 4 INSERTION OF THE TUBES OPERATION OF THE SFD-2 DIGITAL PROCESSOR The SFD-2 comes with two 6922 (6DJ8-type) tubes, individual- Before plugging in the SFD-2, check to see that the unit is config- ly boxed and bagged along with a cotton glove, screwdriver, ured for the correct AC line voltage for country of use.
- Page 5 T R O U B L E S H O O T I N G the Power Indicator LED (B) will flash on and off for approximate- If at any time the SFD-2 Digital Processor fails to work properly, consult ly 45 seconds.
- Page 6 SFD-2 PLACEMENT FOR PROPER VENTILATION LIMITED FIVE YEAR WARRANTY Allow at least 6” (15 cm) of clear space above the SFD-2 Sonic Frontiers, Inc. warrants to the purchaser that each SFD-2 chassis for proper ventilation, making sure the air vent slots in Digital Processor is free of manufacturing defects for a period the chassis cover remain unobstructed.
- Page 7 SFD-2 TECHNICAL SPECIFICATIONS Input Receiver UltraAnalog AES20 AES/EBU ultra-low jitter Input Receiver Digital Filter NPC 5803 (8-times oversampling) D/A Converters 2 dual UltraAnalog D20400A (balanced configuration) Low Pass Proprietary passive configuration Analog Filter Frequency Response 5 Hz to 20 kHz + 0.5 dB 20 kHz - 0.1 dB Intrinsic Jitter <...
- Page 8 We at Sonic Frontiers are sure that you will derive many years of listening pleasure with your new SFD-2 Digital Processor. This Owner’s Manual contains important information regarding the operation and care of the SFD-2. Be sure to read this manual carefully and follow these instructions in order to keep it looking, operating and sounding its best.