Locking The Controller - American DJ Stage Desk 16 User Instructions

LCD Display Value Shift:
This function changes the LCD values from percentage to DMX value.
0~100 will equal percentage and 000~255 will equal DMX value. To
change the way the LCD displays the value:
Step 1:
Shut down the main power and press and hold down built-in pattern
buttons 5, 6, 7, and 8.
Step 2:
While holding down the pattern button, turn the main power back on.
This will enter the set-up mode.
Step 3:
You will notice that Pattern Button LEDs 1, 2, 3, and 4 have turn on.
Press Button 3 for percentage or 4 for DMX values.
Step 4:
When you have made your selection press the Blackout Button twice to
lock this setting in to memory and return to normal operation.
Remote Control:
On the rear of the unit there is a connection for a remote control, this
remote is a wired foot switch. This remote has been designed with a
band in mind. The remote allows you hand-off control over two of the key
function of the controller Full On and Stand -By (Blackout).
Full On: This function will bring all the slider channels to full output.
Stand-By: This function will shut down all slider channel output. During
stand-by mode the chase patterns will continue to run in the back
ground. Full-on function will override the controller when it is in stand-by
mode.
Initializing to Default Settings:
This function will erase all your preset programs and scenes. The built-in
chase patterns will not be effected. Caution! This function is irreversible
and the chase patterns can not be recovered once the memory is
erased. To erase the controller memory:
Step 1:
American DJ Supply www.americandj.com Stage Desk-16™ Instruction Manual Page 21
© ®
Operation Cont.
While the power is on press and hold down Pattern Buttons 3, 6, 10,
and 15.
Step 2: Wait approximately 30 seconds and turn the power back on. This
will delete all the chase patterns your programmed.

Locking the Controller:

Program Lock: This function allows you to lock the controller's program
function, preventing someone from changing or erasing valuable pro-
grams. To lock the controller program settings:
Step 1:
Press and hold down the Step and Blackout Buttons simultaneously. You
will notice the lock icon flashing on the left side of the LCD display, this
indicates the lock function may be set.
Step 2:
While holding down the Step and Blackout Buttons, use the Program
Button to toggle between "ON" and "OFF" in the LCD display. Make your
selection and release the Program Button.
Step 3:
After you have made your changes release the Step and Blackout
Buttons to return to normal operation.
Manual Lock: This function allows you to lock the controller memory,
prevent someone from changing or erasing valuable programs. To lock
the controller:
Step 1:
Press and hold down the Step and Blackout Buttons simultaneously. You
will notice the lock icon flashing on the left side of the LCD display, this
indicates the lock function may be set.
Step 2:
While holding down the Step and Blackout Buttons, use the Program
Button to toggle between "ON" and "OFF" in the LCD display. Make your
selection and release the Program Button.
Step 3:
After you have made your changes release the Step and Blackout
Buttons to return to normal operation.
American DJ Supply www.americandj.com Stage Desk-16™ Instruction Manual Page 22
© ®
Operation