Table of Contents
Advertisement
American DJ
STAGE SETTER-8
User Instructions
®
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Stage Setter 8™ Introduction
Introduction:
Thank you for purchasing the American DJ
the performance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit. The
™
American DJ
Stage Setter 8
®
This unit has been tested at the factory before being shipped to you, there
is no assembly required.
Customer Support:
American DJ
provides a toll free customer support line, to provide set up
®
help and to answer any question should you encounter problems during
your set up or initial operation. You may also visit us on the web at
www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 10:00 a.m. to 5:00 p.m. Pacific
Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do not
expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ
dealer.
®
Do not discard this cartoon in the trash. Please recycle when ever
possible.
Upon unpacking, carefully inspect your unit for any damage that may have occurred
during shipping. If damage may have occurred, do not plug the unit in, please contact
your dealer as soon as possible.
American DJ Supply
www.americandj.com Stage Setter 8™ Instruction Manual Page 2
©
®
™
Stage Setter 8.
To optimize
®
is a unique 16 channel DMX controller.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for American DJ Stage Setter 8
Summary of Contents for American DJ Stage Setter 8
- Page 1 American DJ Stage Setter 8™ Introduction Introduction: ® ™ Thank you for purchasing the American DJ Stage Setter 8. To optimize ® the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. The ™...
-
Page 2: Table Of Contents
Warranty.......................23 Improvements and changes in specifi cations and design to this manual and unit may be made at any time without prior notice. American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 3 American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 4 ©... -
Page 3: Power Supply
Before plugging your unit in be sure the source voltage in your area matches electrical cord. This prong is used to reduce the risk of electrical the required voltage for your American DJ Stage Setter 8.™ The American DJ shock and fire in case of an internal short. -
Page 4: Frt Panel Controls And Functions
These 8 sliders are used to control the intensities of channel 1-8. The over- all intensity of channel faders 1-8 is controlled by the X Crossfader (5). American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 7 ©... - Page 5 Blackout (15) function or the Master The offset configuration of the X (5) and Y (6) crossfaders allows easy Level (8) setting. American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 10 American DJ Supply - www.americandj.com - Stage Setter 8™...
- Page 6 16. Fog Machine Button: channels, this makes each button a Flash Scene. This button is used to control fog output to compatible American DJ fog machine. These fog machine include the Master Blaster 700 and 1000, The Bump Buttons are also used in programming mode, when program- Vaporizer, and the Dyno Fog.
-
Page 7: Rear Panel Controls And Functions
This jack receives an incoming MIDI signal from external MIDI controller or keyboard. 23. Fog Machine Connector: Use this connection to connect a compatible American DJ fog machine, such as the Master Blaster 700 and 1000, Vaporizer, and the Dyno Fog. Rear Panel Label This eliminate the need of separate controller. -
Page 8: Operating Modes
1. Move X and Y Crossfaders to maximum. (X Crossfader fully up and Y Crossfader fully down) American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 15 American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 16 ©... -
Page 9: Programming Chase Patterns: 2X8 And 8X8 Modes
This will manually release the program mode. NOTE: While in program mode, all other functions will lock. American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 17 American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 18 ©... -
Page 10: Midi Operation
Turn on or off Bump Button 1-8 46-57 Turn on or off Pattern 1-12 Mode Full On Blackout American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 19 American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 20 © ®... -
Page 11: Memory Dump
The unit will now return to the default settings. Dimensions........................310x222x71mm Steps................Up to 32 steps for each pattern Weight.......................2.4 Kg American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 21 American DJ Supply - www.americandj.com - Stage Setter 8™ Instruction Manual Page 22 ©... -
Page 12: Warranty
® parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ under ® this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ .
Need help?
Do you have a question about the Stage Setter 8 and is the answer not in the manual?
Questions and answers