Hybrid Graphics Technology - ECS A790GXM-AD3 Manual

56
Hybrid Graphics
The Hybrid Graphics
to AMD-based systems by inserting the external PCI Express graphics card and
enabling both the discrete GPU and the 790GX graphics core to render simultaneously
in Hybrid CrossFire
Follow the steps below to start the Hybrid Graphics
1. Insert a graphics card (which can be used for Hybrid Graphics
HD3400 series) into the PCIE16X_1 slot.
Make sure that the card is properly seated on the slot.
2. For Hybrid Graphics
Surround View in Advanced Chipset Setup to PCI-E. Then press F10 to save the
configuration and exit the BIOS. After entering OS, enter Catalyst Control Center to
enable CrossFire.
Note: SurroundView
multimonitor support for computers that use a PCI-E based graphics
card in conjunction with ATI integrated graphic processors. And there
are two options: Disabled and PCI-E.
If SurroundView
OnBoard, SurroundView
based on cancel the Enable CrossFire
ATI CrossFireX
®
Technology
® technology provides significant display performance boost
® mode.
® , if display by PCI-E, you must enter the BIOS, set the
TM
provides the power and convenience of multiadapter,
TM
set to Disabled, and Init Display First set to
TM
will be Enabled by Catalyst Control Center
Technology & Hybrid Graphics
TM
Technology Support
®
technology.
®
technology, such as
TM option.
®