Checking Jumper Settings; Jumper Settings - ECS A880GM-AD3 Manual

Checking Jumper Settings & Clear CMOS Button
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.

Jumper Settings

Type
Jumper
button
CLR_CMOS_BTN
CLEAR CMOS
USBPWR_F1 3-pin
3-pin
USBPWR_F2
USBPWR_R1 3-pin
USBPWR_R1 3-pin
1. To avoid the system unstability after clearing CMOS, we recommend
users to enter the main BIOS setting page to "Load Default Settings" and
then "Save & Exit Setup".
2. Make sure the power supply provides enough 5VSB voltage before
selecting the 5VSB function.
3. It is required that users place the USBPWR_F1~2 & USBPWR_R1~2
cap onto 2-3 pin rather than 1-2 pin as default if you want to wake up the
computer by USB/PS2 KB/Mouse.
Installing the Motherboard
Setting (default)
Description
NO PUSH: NORMAL
PUSH: CLEAR
1-2: VCC5
USB Power
2-3: 5VSB
Cotroller
1-2: VCC5
USB Power
Cotroller
2-3: 5VSB
1-2: VCC5
USB Power
Cotroller
2-3: 5VSB
1-2: VCC5
USB Power
Cotroller
2-3: 5VSB
9
CLR_CMOS_BTN
1
USBPWR_F1
1
USBPWR_F2
1
USBPWR_R1
1
USBPWR_R2