ECS G41T-M Manual page 35

Primary IDE Master/Slave; SATA1~4
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports four SATA chan-
nels and each channel allows one SATA device to be installed. Use these items to
configure each device on the SATA channel.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Device
: ATAPI CDROM
Vendor : DVD-ROM DDU1632
LBA Mode : Supported
PIO Mode
: 4
Async DMA : MultiWord DMA-2
Ultra DMA : Ultra DMA-2
Type
PIO Mode
DMA Mode
: Move
F1: General Help
Type (Auto)
Use this item to configure the type of the IDE device that you specify. If the feature
is enabled, it will enhance hard disk performance by reading or writing more data
during each transfer.
PIO Mode (Auto)
Use this item to set the PIO mode to enhance hard disk performance by optimizing
the hard disk timing.
DMA Mode (Auto)
DMA capability allows user to improve the transfer-speed and data-integrity for
compatible IDE devices.
Press <Esc> to return to the Standard CMOS Setup page.
IDE BusMaster (Enabled)
This item enables or disables the DMA under DOS mode. We recommend you to leave
this item at the default value.
Press <Esc> to return to the main menu setting page.
Primary IDE Master
Select the type
of device connected
to the system.
Auto
Auto
Auto
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
Help Item
31