Recording A Midi Track Using Proteus Vx - E-Mu 404 Owner's Manual

Tutorials
34

3 - Recording a MIDI Track using Proteus VX

These instructions explain how to start Proteus VX from within Sonar LE. You'll
need a MIDI keyboard (or other MIDI input device) for this tutorial.
• Important: If Sonar was installed BEFORE Proteus VX VSTi, you will have to
run the Cakewalk VST Adapter before Sonar can use the VSTi. (Start,
Programs, Cakewalk, Cakewalk VST Adapter).
1. Connect the MIDI output of your MIDI keyboard to the MIDI input of the
0404 USB 2.0.
Select the Virtual Instrument
2. Select Synth Rack from the View menu. The following window appears:
Click Here
+
3. Click on the symbol to add an instrument. Follow the path shown above
and select Proteus VX from the list of VST instruments. The following pop-up
dialog box appears.
4. Select the default options (MIDI Source Track & First Synth Output) as shown.
Click OK to continue. (This may a take a few seconds.)
5. Proteus VX now appears in the Synth rack and two new tracks have been
added to the bottom of the track list. (You may have to scroll down to see the
new tracks.)
New Proteus VX Tracks
Audio Output from Proteus VX
MIDI input to Proteus VX
Click Here to view the strip controls.
E-MU Systems