Advertisement
Cross Flash™
Caution:
Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized American DJ
Replace with anything other than the specified part can damage your
unit and will void your manufactures warranty.
Warning:
If after you have replaced the lamp or fuse and you
continue to blow either one, STOP using the unit. Contact customer
support for further instructions, you may have to return the unit for
servicing. Continuing to use the unit may cause serious damage.
Fuse Replacement:
Disconnect the unit's main power supply. Insert a standard flat head
screw driver in to the fuse holder housing (located on the rear of the
unit). Turn the screwdriver in a counter-clockwise direction to remove
the fuse holder. Remove the old fuse and discard it, replace the fuse
with the same type. Insert the fuse holder back into it's housing and
turn in clockwise direction to lock the holder in place.
Lamp Replacement:
Caution! Never open the unit when in use. Always disconnect the
main power and allow the fixture ample time to cool before attempting
to replace the lamp. Lamp replacement has been made simple by
incorporating a split dome that is retained by thumb screws. Again,
please remember to always replace with the exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
lamps. Never touch the new lamp with your bare fingers.
2. Unscrew the single thumb screw located on the bottom of the front
cooling fan.
3. Carefully lift the cooling fan housing up to expose the lamp.
4. Remove and replace the lamp with an exact match.
5. Reassemble in reverse order.
Cross Flash™
The Cross Flash™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty you must provide a copy of your proof of
purchase invoice. Please contact American DJ
a R.A. number.
American DJ Supply
- www.americandj.com - Cross Flash™ Instruction Manual Page 5
©
®
Fuse & Lamp Replacement
DJ technician.
DJ
technician.
®
®
®
®
Warranty Registration
customer support for
®
Cross Flash™
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and external
lenses should be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft
cloth every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-
mend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp beam output.
Cross Flash™
Trouble Shooting:
Listed below are a few common problems and solutions you should try
before contacting customer support.
Unit rotates but has no light output from the unit;
1. Be sure you have connected your unit into a matching wall outlet.
2. Remove the lamp cover and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during shipping
be sure the lamp is push in to its socket all the way.
3. Be sure the lamp is good.
Unit does not rotate and lamp does not turn on;
1. Be sure you have connected your unit into a matching wall outlet.
2. Be sure the external fuse has not blown. The fuse is located on the
rear panel of the unit.
3. Be sure the unit power cord is properly seated in the power outlet
and the outlet has power.
4. Be sure the fuse holder is securely seated in the fuse holder
housing.
American DJ Supply
- www.americandj.com - Cross Flash™ Instruction Manual Page 6
©
®
Cleaning
Trouble Shooting
Advertisement
