Canon 8861A003 - EOS Digital Rebel Camera SLR Software Instruction Manual page 155

Approximate Transfer Times
• The transfer times given here are only approximations. Actual transfer times vary
widely depending on the images and the computer system.
• Transfer times are based on Canon testing standards.
(Time until the RAW image appears in the Save window when the [Release] button is
pressed in the Shooting window and [Computer only] is specified using the following: OS:
OS X (10.2); CPU: Power PC G4 700 MHz; RAM: 256 MB)
• The times for images shot in JPEG format will be shorter than those shown above.
●
With the auto focusing, if the camera cannot focus, you cannot take shots.
If you cannot take shots with the auto focusing, focus manually and then take a
shot.
●
The test-shot images taken with the camera held vertically are displayed in the
normal (horizontal) orientation in the test-shot image display area.
To rotate a downloaded image, select the image and then select [Rotate Saved Image
90 degree Right] or [Rotate Saved Image 90 degree Left] in the [Edit] menu.
Timer Shooting
Use this function to specify the timer delay. Timer shooting shots are then taken after the
specified number of seconds.
1
Select [Timer Shooting] in the [File] menu.
\
The [Timer Shooting] dialog box appears.
2
Enter the timer setting (in seconds) and click the [Start] button.
●
You can set a value between 2 and 30 seconds in 1-second increments.
\
Timer shooting shots are taken after the specified number of seconds.
Transfer Time Approx. 59 sec.
Using RemoteCapture
M-51
M
4