Canon 8861A003 - EOS Digital Rebel Camera SLR Software Instruction Manual page 112

Setting the Communication Mode
To communicate with the camera using the software on the SOLUTION DISK, set the
camera's communication mode to [Normal].
If you set the communication mode to [PTP], the SOLUTION DISK software
cannot communicate with the camera. When you are using the software, always
set the communication mode to [Normal].
1
Check that the camera is not connected to the computer and then
set the power switch to <ON>.
2
Set [Communication] in menu option <
3
Press the <MENU> button to switch the LCD monitor display off
and then set the power switch to <OFF>.
When setting the communication mode, always ensure that the camera is not
connected to the computer beforehand. Setting the communication mode while the
camera is connected to the computer will cause camera and software malfunctions.
About the PTP Setting
The PTP function is only available to OS X users. This function provides a simple means of
downloading JPEG images to your computer. To use this function, set [Communication] to
[PTP] in step 2 above.
●
For more information on using the PTP function to download JPEG images, see
"Downloading JPEG Images Using the PTP Function in OS X (10.1 or later)" (M-12).
M-8
> to [Normal].