Table of Contents
Advertisement
EN
Acer v200 Series Travel Companion
fundamentals
This section describes basic hardware procedures in using your Acer v200 Series Travel Companion. Information
on the device's command interface is also discussed.
Hardware interface
Using the SD/MMC slot
Your Acer v200 Series Travel Companion has an SD/MMC slot compatible with a range of SD and MMC storage
cards that you can use to back up or transfer files and data.
Also, the Acer v200's GPS navigation system has its core on the Navigation software program. Using this
program requires that users load the digital maps available in the Map SD card included with the device.
To insert a storage card:
Hold the device securely; then push the card into the slot until you hear an audible system sound; this will signal
that the card is already properly seated within the slot. The card is secure when it is not protruding from the
slot.
Correct SD card usage
Do not remove the SD card while the device is turned on. Only remove the SD card when the device is turned
off.
Back-up your SD card
Remember to back-up your SD card. All the information and data needed to run the software for the device are
inside your SD card. One way is to back-up your data to a PC.
14
EN
Advertisement
Table of Contents
