Table of Contents
Advertisement
APSNUG.book Page 61 Tuesday, May 4, 1999 11:13 AM
Parameter
Description
Silent Boot
When enabled, BIOS is in
graphical mode and
displays only an
identification logo during
POST and while booting.
Then, the screen displays
the operating system
prompt (as in DOS) or logo
(as in Windows 95). If any
error occurs while booting,
the system automatically
switches to the text mode.
You may also switch to the
text mode while booting by
pressing F9 after you hear
a beep that indicates the
activation of the keyboard.
Num Lock After
Allows you to activate or
Boot
deactivate the Num Lock
function upon booting.
Memory Test
Lets you specify whether
you want BIOS to perform
or bypass the RAM test
during POST.
Configuration Table
Allows you to enable or
disable the display of the
configuration table after
POST but before booting.
The configuration table
gives a summary of the
hardware devices and
settings that BIOS detected
during POST. This
parameter appears only
when you are in the
Advanced Level.
61
Options
Enabled or
Disabled
Enabled or
Disabled
Enabled or
Disabled
Enabled or
Disabled
Advertisement
Table of Contents
