Table of Contents
Advertisement
APSNUG.book Page 59 Tuesday, May 4, 1999 11:13 AM
Parameter
Description
System Sleep
Automatically puts the system
Timer
to power-saving mode after a
specified period of inactivity.
Any keyboard or mouse
action, or any activity detected
from the IRQ channels
resumes system operation.
Sleep Mode
Lets you specify the power-
saving mode that the system
will enter after a specified
period of inactivity. This
parameter is configurable only
if the System Sleep Timer is
enabled.
Power Switch < 4
Lets you specify whether to
sec.
automatically turn off the
machine or put the system to
Suspend mode when the
power switch is pressed for
less than 4 seconds.
System Wake-up
Lets you specify the activity
Event
that will resume the system to
normal operation.
Modem Ring
Wakes the system from Sleep
Indicator
mode once any fax/modem
activity is detected.
59
Options
2, 5, 10, 15, 20,
30, 40, 50...120
minutes, or Off
Standby or
Suspend
Power Off or
Suspend
Enabled or
Disabled
Advertisement
Table of Contents
