To Configure Print Settings For A Single Image - Casio Exilim EX-Z4U Function Manual

FILE MANAGEMENT
To configure print settings for a single
image
1.
In the PLAY mode, press [MENU].
2.
Select the "PLAY" tab,
select "DPOF", and
then press [ ].
3.
Use [ ] and [ ] to select "Select images",
and then press [ ].
4.
Use [ ] and [ ] to
display the image you
want.
5.
Use [ ] and [ ] to specify the number of
copies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
6.
To turn on date stamping for the prints, press
[DISP] so is displayed.
12 12
1
• To turn off date stamping for the prints, press [DISP]
so is not displayed.
12 12
1
• Repeat steps 4 through 6 if you want to configure
other images for printing.
7.
After all the settings are the way you want,
press [SET] to apply them.
108