Altigen Contact Advantage Manual page 82

Before You Set Up ONA
• ONA must be enabled by your system administrator.
• Your Call Handling settings must not conflict with ONA. Specifically:
— Do Not Disturb must be disabled. Otherwise, if your line is busy,
all calls will go into voice mail and not to the ONA forwarding
numbers you specify.
— Enable Call Forward must be disabled. Otherwise, all calls will be
forwarded according to this setting.
See "Call Handling" on page 69 for details on these settings.
Accessing One Number Access Setup
After you set the call handling options, click the One Number Access tab
in the Config window to open the One Number Access window.
Figure 4. One Number Access window
Contact Advantage Manual 71