Advertisement
Triton Analog Extension Board (PCI)
Model: ALTI-TTAS-12
Dedicated voice channel for every extension port and FSK-only message waiting.
LED 1B
ON
OFF
ON
OFF
LED 2, located near the 12V connector, is a red LED for diagnostic purposes. If
it is ON, the fuse is blown.
Audio Input
The audio input and first extension share the same physical port. The first extension
port cannot be used as a physical extension when this board is assigned as a music
on hold input board. The audio input port is a 3.5mm phone jack connector, with a
20k ohm impedance.
Triton Analog Trunk Board LS/GS and LS(PCI)
This board comes in two models: Loop Start/Ground Start (LS/GS) and Loop Start
only (LS). It supports 12 analog trunks and offers FSK Caller ID receiving, Centrex
flash, and voice/silence activated answer supervision. This board is also compatible
with major PCI chassis vendors.
Models
ALTI-TTAT-12GS
ALTI-TTAT-12
LS/GS LED Indicators*
LED 1B
LED 1A
ON
ON
OFF
OFF
No power to board
ON
OFF
No +5V or less than
4.1V
OFF
ON
No +12V or less than
9.2V
*LED 2, located on the board, is a red LED for
diagnostic purposes. If it is ON, the fuse is blown.
12 Extensions
LED Indicators
LED 1A
ON
5V is OK; 12V is OK – normal operation
OFF
Power cable not plugged in
OFF
5V less than 4.5V but more than 3V – bad PC 5V
power
ON
12V less than 9V – bad PC 12V power
12 Trunks—Loop Start/Ground Start
12 Trunks—Loop Start
LS LED Indicators
Status
LED 1B
Normal
ON
OFF
Status
LED 1A
Status
ON
Normal
OFF
No +5V or less than
4.1V
Advertisement
