Table of Contents
Advertisement
Connections
Connecting to a TV / AUDIO System
C igarette
J ack
1. Connect the audio cables between the Audio Out L and R jacks on the back of your DVD player and the
corresponding Audio Input jacks on your audio system. You can listen more loudly to the sound of audio
CDs and DVD video discs in stereo when you are using a FM modulator.
2. Connect the video cables between the Video Out jacks on the back of your DVD player and the
corresponding Video Input jacks on your TV.
C
C
a
a
u
u
t
t
i
i
o
o
n
n
When you connect the DVD player to other equipment, be sure to turn off the
power and unplug all of the equipment from the power source before making any
connections.
Be sure to adjust the receiver's volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume level.
Turn off the receiver before you connect or disconnect the DVD player's power
cord. If you leave the receiver power on, the speakers may be damaged.
W
a
r
n
i
n
g
Do not set the Digital Audio Output of this DVD player to "PCM" unless you are
W
a
r
n
i
n
g
connecting the Digital Audio jack of this DVD player to an AV decoder that has
Dolby Digital decoding function.
High volume sound may damage your hearing as well as speakers.
Audio Cable
Video Cable
or
TV or Monitor with
Audio/Video Inputs
19
Rear Panel
FM Antenna
Car FM Tuner
Advertisement
Table of Contents
