Binatone Terrain 750 User Manual page 4

3.2 Turning the Unit ON/OFF
To Turn ON;
a. Press and hold the
turns ON and displays the current channel.
To switch OFF;
Press and hold the
b.
turns blank.
You will hear a beep tone each time to confirm.
3.3 Adjusting the Speaker volume
The volume level is shown by vertical bars on the LCD screen.
You can change the volume while using your PMR, or while
the unit is idle (switched on but not in use).
Press the
to decrease the speaker volume.
3.4 Changing Channels
Your Terrain 750 has 968 Channel Combinations
The Terrain 750 has 8 vavilable main channels, To
communicate with other Terrain 750 users whthin range,you
must all have your Terrain 750 tuned to the same channel.
Press the
a.
flashes on the LCD Screen.
b. Press the
channel. The channel changes from 1 to 8, or vice versa.
Press the
c.
Note: Refer to the "Channel Frequency
user guide for detailed frequency listings.
3.4.1 Setting the CTCSS sub-channel
Each channel also has 38 sub-channels to let you set up a group
of users within the same channel for more private
communication. If you have set the sub-channel, you can only
communicate with other PMR users tuned to the same channel
and sub-channel.
To turn the sub-channel function off, simply set the sub-
channel to
set to the same channel who also turns off the sub-channel
operation (or whose PMR unit does not have the feature).
a. Press the
channel number flashes on the
b. Press the
CTCSS sub-channels.
c. Press the
POWER
POWER
UP button to increase, or press the
MENU button once, the current channel number
UP DOWN
or button to select the desired
PTT button to confirm the channel setting.
0
(zero). You can communicate with any PMR user
MENU button twice, the current CTCSS sub-
UP or DOWN button to select one of the 38
PTT button to confirm the sub-channel setting.
button until the LCD Screen
button until the LCD screen
DOWN
Table" section of this
LCD Screen.
button