If you need help … The Binatone Help Line is available from 9.00 am to 5.00 pm, Monday to Friday, on 01325 304 473. Emergency calls In the event of an incident or accident, the MR700 cannot be...
Quick reference The display channel number is shown here when you’re using the MODE button CHAN FM wavelength is shown (with CTCSS Press and hold to when you’re using the radio receiver switch between modes: Minutes and seconds are shown when PMR —...
Scanning channels, 10 The Dual Watch function, 11 Locking the buttons, 11 The ‘Roger’ beep function, 12 Using the stopwatch To turn the stopwatch function on and off, 13 To use the stopwatch, 13 Binatone Help Line: 01325 304 473...
Using any other adapter will result in non-compliance with Switch on mains power at the EN61554, and will invalidate any socket after you’ve plugged in approval given to this apparatus. the mains adapter Binatone Help Line: 01325 304 473...
(switched on but not in use). obstructions between you. The torch To shine the torch, press and hold the TORCH button. The torch works even when the handset is switched off. Binatone Help Line: 01325 304 473...
You can also use channel scanning, as appears on the display but you can’t hear described on page 10. anything, this means that someone is transmitting on the same channel but is using a different CTCSS code. Binatone Help Line: 01325 304 473...
Level 3, it will pick up only quite loud noises. Press the MENU button SEVEN times appears on the display and the current setting (1 2 3 or o ) is shown. Binatone Help Line: 01325 304 473...
Your handset will now be set to this channel and you can carry on receiving and transmitting on it. If you don’t press the PTT button, the handset will carry on scanning. Binatone Help Line: 01325 304 473...
To use the To start the stopwatch running: stopwatch ◗ Press the START/CALL/+ button To pause the stopwatch: ◗ Press the STOP/LOCK/– button To reset the stopwatch to zero (00. ◗ Press the STOP/LOCK/– button again Binatone Help Line: 01325 304 473...
Press the PTT button Press and hold the MODE button for 1 second until you hear a double-beep tone You have now stored this station in memory location 1. Binatone Help Line: 01325 304 473...
It disappears if you set APO to 0 Declaration of conformity Using the hands-free kit The Binatone MR700 conforms to the following standards: To connect the hands-free kit to your MR700 handset, EN 301489 (RF testing) plug it into the socket at the side of the handset.
If the radio isn’t finding a channel using auto- Noisy reception is more likely when using high-numbered scanning — try manual scanning instead CTCSS codes — try using a lower-numbered code, agreeing this with the rest of your group first Binatone Help Line: 01325 304 473...
Page 13
Index approvals, 17 radio frequency exposure, automatic squelch circuit, 9 receiving a transmission, 7 Auto-Power-Off (APO), 16 resetting the handset, 18 batteries scanning channels, 10 charging the batteries, 3 stopwatch, 13 fitting the battery pack, 2–3 switching on and off, 4 specification, 17 talk range, 5 Call Ring tone, 8...