Beko WM5101W Installation & Operation Manual page 29

water by running the Pump or Spin programme.
programme completes.
deactivation of the door lock.
water to prevent poor washing quality due to the decreased amount of water.
Therefore, the washing time extends.
results when the supply voltage is low.
extends in cold seasons. Also, washing time can be lengthened to avoid poor
washing results.
Machine increases the amount of rinse water when good rinsing is needed and
adds an extra rinsing step if necessary.
recommended amount of detergent.
C
the machine takes in adequate amount of water. The machine will wait until there
is sufficient amount of water to avoid poor washing results due to lack of water.
Timer indicator will resume countdown after this.
the machine reaches the selected temperature.
system might be activated due to the unbalanced distribution of the laundry in the
drum.
C
unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the drum.
C
Wait for a couple of minutes for
Machine waits until taking in adequate amount of
Washing time is prolonged to avoid poor washing
Timer indicator will not countdown until
Timer indicator will not countdown until
Automatic unbalanced load detection
Required time to heat up the water
Automatic
Drain the
Wait until the
Use