JVC KD-R740BT Instruction Manual page 13

Character search
You can search through the contacts quickly according to the first character (A to Z,
0 to 9, and OTHERS).
• "OTHERS" appear if the first character is other than A to Z, 0 to 9.
1
Press .
2
Turn the volume knob to select [PHONEBOOK], then press the knob.
Press 1 ∞ / 2 5 to select the desired character.
3
4
Turn the volume knob to select the desired contact, then press the knob to call.
Use Voice Recognition
1
Press and hold to enter Voice Recognition mode.
If two phones are connected, turn the volume knob to select the desired phone,
then press the knob.
2
Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
Store a contact in memory
You can store up to 6 contacts.
1
Press .
2
Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or [DIAL NUMBER],
then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
4
Press and hold one of the number buttons (1 to 6).
"MEMORY PX" flashes when the contact is stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in step
a blank number.
EN_KD-A845BT[J]f.indd 13
Make a call from memory
1
Press .
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO PRESET" appears if there are no contacts stored.
Delete a contact
Only when [P.BOOK SEL] is set to [PB IN UNIT]. (
1
Press .
2
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then press the
knob.
3
Turn the volume knob to select a contact or enter a phone number.
Press and hold G.
4
5
Turn the volume knob to select [DELETE] or [DELETE ALL], then press the knob.
DELETE: Selected name or phone number in step
DELETE ALL: All names or phone numbers from the selected menu in step
deleted.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the Bluetooth
device and the unit.
1
While pressing and holding
3 seconds.
"BLUETOOTH" Ô "CHECK MODE" appears.
2
Search and select "JVC UNIT" on the Bluetooth device within 3 minutes.
"PAIRING OK" appears and Bluetooth compatibility check starts.
The connectivity result flashes on the display for 30 seconds.
2 • "H.FREE OK" Ô "[Device Name]" : Compatible with Hands-Free Profile (HFP)
and store
• "A. STREAM OK" Ô "[Device Name]" : Compatible with Advanced Audio
Distribution Profile (A2DP)
• "CONNECT FAIL" Ô "TRY CONNECT" : Not compatible
• To exit, turn off the unit by pressing and holding L SOURCE.
13
BLUETOOTH®
12)
3
is deleted.
, press and hold the volume knob for about
10/23/12 12:43:23 PM
2
is
ENGLISH