TRENDnet TFC-1000S60D5 Manual

PRODUCT OVERVIEW
FEATURES
• Must use with TFC-1000S60D3
• SC-type dual-wavelength single-mode fi ber port connects over distances of up to 60 km (37.3 miles)
• 1000Base-T Gigabit copper port supports Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fi ber chassis
• Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards
• 1 x 1000Base-T RJ-45 port
• 1 x 1000Base-LX single-mode bi-directional simplex-SC type fi ber port
• Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable)
• Support LLCF (Link Loss Carry Forward, Link Pass Through)
• Support LLR (link Loss Return) for FX port
• Monitor and confi gure Ethernet or Fiber's duplex mode, LLR, port on/off and receive link down information via management
module TFC-1600MM and chassis TFC-1600
• Status LED indicators for Power and Link / Activity
• Wall mountable
• Optional 19" system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters
• 3-year limited warranty
Intelligent 1000Base-T to 1000Base-LX
Dual Wavelength Single Mode SC Fiber
(60 km / 37.3 miles)
TFC-1000S60D5 (C1. 1 R)
The TFC-1000S60D5 Bi-Directional Intelligent Fiber Converter works
with the TFC-1600 chassis system or as a standalone unit. This
converter is a Dual Wavelength Single Mode SC-Type fi ber converter
that supports port-based SNMP reporting and spans distances up to
60 km (37.3 miles). This module must be used with the
TFC-1000S10D3 module. Ports include 1 x 1000Base-T (RJ-45) port
and 1 x 1000Base-LX (SC Simplex Type) port.
TFC-1000S60D5
Rev: 08.22.2012