3Com 3C19250 - USB Ethernet Network Interface Card User Manual page 4

LAN Adapter Support, Universal Serial Bus (USB) Ethernet Support Device Driver.
©2003, Jonas Buys.
similar thing as shown in FIGURE2. In the Parameters for USB ETHeRnet
Adapter dialog box, click in the USB Vendor ID field, and change the value
so that it matches your adapter's one. Then do the same for Product ID
field. When finished, confirm the changes by clicking the OK button. Note
that you needn't include the "0x" in front when entering the IDs.
Figure 1: The Adapter and Protocol Configuration dialog box.
7. Add the required protocols from the Protocols list to the USB Ethernet
adapter. You can do this by selecting the appropriate network interface
card (NIC) in the Current Configuration field, selecting a protocol in the
Protocols field, and clicking Add. The associated protocol should appear
indented underneath the NIC to which it was assigned. You can change the
protocol setting by selecting the assigned protocol in the Current
Configuration field, and clicking the Edit button.
8. Press OK button to close Adapter and Protocol Configuration dialog
box.
JBHWIS00001.
www.os2warp.be