Bluetooth Setup; Bluetooth Setup Operation; Setting The Bluetooth Device - Alpine KCE-300BT Owner's Manual

Bluetooth SETUP

Bluetooth Setup Operation

The following steps 1 to 5 are common to the various
Bluetooth functions. For details, refer to each individual
function.
• If Bluetooth Audio is selected on the source when calling
or in the Tel. mode, Bluetooth Setup operation cannot be
performed.
• Refer to the Owner's Manual of the CD Head unit, AV
Head Unit or Digital Media Receiver, and set "Bluetooth
IN" to ADAPTER, and then perform Bluetooth SETUP
operation.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE].
The SOURCE SETUP screen is displayed.
3
Touch [ ] of BLUETOOTH or BLUETOOTH
SETUP.
The Bluetooth setup is displayed.
4
Touch [;] / [:] , [ON] / [OFF] or [
desired item to change its setting.
Setting items:
PAIRED DEVICES / DEVICE SEARCH / CLEAR
DEVICE / VISIBLE MODE / AUTO ANSWER
5
Touch [RETURN] to return to the previous
screen.
Controlling from a CD Head Unit / Digital Media
Receiver:
1 Press and hold SETUP for at least 2 seconds.
2 Turn the Rotary encoder or the Center jog dial to select
Bluetooth or Bluetooth IN, and press ENT. (Depending
on the connected units, this operation may not be
necessary.)
3 Turn the Rotary encoder or the Self-return encoder to
select the desired setting items and press ENT.
Setting items:
Bluetooth IN ↔ Paired Device * ↔ Visible Mode * ↔
AUTO Answer *
* When Bluetooth IN is set to ADAPTER, the above
items are displayed.
4 Turn the Rotary encoder or the Center jog dial to change
the settings.
5 Press ENT. (Depending on the connected units, this
operation may not be necessary.)
6 Press and hold SETUP or BACK for at least 2 seconds.
The SETUP mode is canceled.
4
-EN
ALPINE KCE-300BT 68-08564Z70-A (EN)

Setting the Bluetooth Device

Select one of 5 connected Bluetooth compatible units that
you previously registered (one registered by guest mode*).
Setting item: PAIRED DEVICES
1
Select a Bluetooth compatible unit to use
(change connection) from the PAIRED
DEVICE list.
2
Touch [:].
• If the connection is successfully changed, "CONNECTED/
(Device name)" is displayed for 2 seconds, and then the
display returns to the SETUP screen.
• If you input the wrong passcode or communications fail,
"FAILED" is displayed.
• If you want to connect another Bluetooth compatible unit,
after disconnecting the current Bluetooth compatible unit,
connect the Bluetooth compatible unit you want to change
to.
The PIN code is fixed as "0000."
* Guest mode:
Use this mode for a temporary pairing. Registration (in
guest mode) is canceled once the ignition key goes from
ACC to off.
Controlling from a CD Head Unit / Digital Media
Receiver:
] of the
1 Turn the Rotary encoder or the Center jog dial to select
a mobile phone you want to use (you want to change
connection).
2 Press ENT. (Depending on the connected units, this
operation may not be necessary.)