Actron OBD II AutoScanner CP9175 Instructions Manual page 12

!
!
!
SF-8
Risk of equipment or circuit damage.
• Unless specifically directed by manufacturer,
make sure ignition is OFF before connecting or
disconnecting connectors or any vehicle
electrical terminals.
• Do not create a short between battery terminals
with a jumper wire or tools.
Improper equipment use can cause equipment or
circuit damage.
Misdiagnosis may lead to incorrect or
improper repair and/or adjustment.
• Do not rely on erratic, questionable, or obviously
erroneous test information or results.
- Make sure all connections and data entry
information are correct and test procedures
performed right, if test information or results
are erratic, questionable, or obviously
erroneous.
- If test information or results are still
suspicious, do not use them for diagnosis.
Improper repair and/or adjustment may cause
vehicle or equipment damage or unsafe operation.
Some vehicles are equipped with air bags.
• Follow vehicle service manual's warnings when
working around air bag components or wiring.
- If service manual instructions are not
followed, air bag may open unexpectedly,
resulting in injury.
- Note air bag can still open up several
minutes after ignition key is off (or if vehicle
battery is disconnected) because of a
special energy reserve module.
An air bag opening can cause injury.