Table of Contents
Advertisement
DRIVER'S SEAT LUMBAR
(
)
ADJUSTMENT
fig. 12
Turn the knob (D) until obtaining the most
comfortable position.
DRIVER'S SEAT HEIGHT
(
)
ADJUSTMENT
fig. 12
To raise the seat, pull the lever (B) up-
wards, then work the lever (up and down)
until reaching the required height, then re-
lease it. To lower the seat, push the lever
(B) downwards, then work the lever (up
and down) until reaching the required
height.
IMPORTANT Adjustment must be car-
ried out only seated in the driver's seat.
TILTING THE BACK REST
To gain access to the rear seats, pull the
handle (E), the back rest folds and the seat
is free to run forwards.
A recovery mechanism with memory
makes it possible to take the seat back to
its previous position.
Once the seat back has been returned to
the travelling condition, make sure that it
is correctly clamped, checking that the "red
band" on the upper part of the handle (E)
is concealed. In fact, this "red band" indi-
cates that the seat back is not clamped.
Also check that the seat is firmly locked on
the runners, trying to move it to and fro.
BACK REST ANGLE
(
)
ADJUSTMENT
fig. 12
Turn the knob(C) until reaching the posi-
tion required.
(
)
fig. 12
CENTRAL ARMREST (fig. 13
The armrest, fitted on some versions, is ad-
justable and can be raised and lowered to
the required position.
To adjust, slightly raise the armrest, then
press the the release device (A).
Inside the armrest there is an oddments
compartment, to use it, raise the cover,
pressing the device (B).
fig. 13
)
A0A0023b
17
Hide quick links:
Advertisement
Table of Contents
