Mute /Pause Function; Audio Adjustments; Tone Adjustment (Bass/Treble); Balance Adjustment - Alfa Romeo GT Owner's Manual

Mute /pause function

(turning off the volume
completely)
To switch on the Mute function, briefly
press the button MUTE. Volume will gradu-
ally lower and the display will show the word
"MUTE" (when in radio mode) or "PAUSE"
(when in CD or CD-Changer mode).
To switch off the Mute function, press the
button MUTE again. Volume will gradually
become louder returning to the value set be-
fore switching on the Mute function.
Changing volume will deactivate the Mute
function and the volume will be set to the
new level selected.
With the Mute function on:
– if an emergency alarm or a traffic bul-
letin arrives with the TA function on, the mes-
sage ignores the Mute function. The Mute
function will be resumed at the end of the
traffic announcement.

Audio adjustments

The options proposed by the audio menu
differ according to the audio source select-
ed: AM/FM/CD/CDC.
To change Audio functions, press briefly
button AUD. The display will show "BASS".
To scroll the Menu options, use buttons ▲
or ▼. To change the setting of the option
selected, press buttons ÷ or ˜.
The display will show the current status
of the function selected.
The functions controlled by the menu are
the following:
– BASS (bass adjustment);
– TREBLE (treble adjustment);
– BALANCE (right/left balance);
– FADER (excluding versions with Bose HI-
FI system) (front/rear balance);
– LD (excluding versions with Bose HI-FI
system) (Loudness on/off);
– PRESET (excluding versions with Bose
HI-FI system) (standard equalization acti-
vation and selection);
– XX USER (personal equalization set-
ting).
Tone adjustment
(bass/treble)
Proceed as follows:
– Use button ▲ or ▼ to select "BASS" or
"TREBLE" in the AUDIO menu;
– press button ÷ or ˜ to in-
crease/decrease the basses or trebles.
Pressing the buttons briefly the change is
gradual by steps. Pressing longer, chang-
ing is faster.

Balance adjustment

Proceed as follows:
– Use button ▲ or ▼ to select "BAL-
ANCE" in the AUDIO menu;
– press button ÷ to increase the sound
from the right speakers or button ˜ to
increase the sound from the left speakers.
Pressing the buttons briefly the change is
gradual by steps. Pressing longer, chang-
ing is faster.
Select "÷ 0 ˜" to set the same val-
ue for both right and left speakers.
151