Table of Contents
Advertisement
PAGE 2: GATE
When entering Bass parts in Step Edit Mode, the Gate
parameter specifies the duration of notes, as a
percentage of the quantization value.
For example, if you have selected a gate time of 99
(which is equivalent to 100% of the quantization value)
and a quantization value of ¼ note, the bass notes will
be ¼ note in duration.
PAGE 3: SELECT THE SWING VALUE (SWING SELECT)
Background: Swing affects the timing of pairs of equal-value notes. Each note normally defaults
to taking up 50% of the total duration of both notes; adding swing lengthens the first note of the
pair, and to keep the total duration of both notes the same, shortens the second note of the pair.
This imparts the kind of feel found in most shuffles and jazz tunes, as well as a laid-back, rhythm
and groove often found in hip-hop, R'n'B and pop music. For example, with Swing set to 62%, the
first note of the pair takes up 62% of the total duration of the pair of notes, while the second note
takes up 38% of the total duration.
Swing shifts notes as specified while you record, so
choose the desired value before playing out your
rhythms.
Enter the desired swing percentage with the INC/DEC
buttons, VALUE dial or number buttons (1 = 54%, 2 =
58%, 3 = 62%, 4-0 = Swing Off).
PAGE 4: ENABLE CLICK AND SET RHYTHM (CLICK SELECT)
The metronome is designed to help you keep track of
time while recording. On this page, you can enable or
disable the metronome, as well as select the rhythm of
the click.
Enter the click value with the INC/DEC or number
buttons (1 = quarter note, 2 = quarter note triplet, 3 = 8th
note, 4 = 8th note triplet, 5 = 16th note, 6 = 16th note
triplet, 7-0 = Click Off).
Note that the click is audible only when recording.
PAGE 5: SET CLICK VOLUME (CLICK VOL)
This page allows you to adjust the volume of the
metronome.
The display shows CLICK VOL and a two-digit number
representing click volume (00 = inaudible, 99 =
maximum volume). Enter the desired click level with the
INC/DEC, number buttons, or by turning the VALUE dial.
31
Advertisement
Table of Contents
