Recovery Media - Toshiba PSC16C-02500M User Manual

Wireless LAN
If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access
Wireless LAN

Recovery Media

Problem
The following
message appears
when executing
Recovery Media
Creator.
[The Recovery
Media Creator
can not be
launched because
there is no
recovery
partition.]
User's Manual
Operating Basics.
Procedure
Make sure the computer's wireless
communication function is set to on.
If problems persist, consult your LAN
administrator.
Procedure
You will see this message if you have previously
chosen to remove the partition and are trying to
create Recovery Media. When there is no
recovery partition, the Recovery Media Creator
cannot make Recovery Media.
However, if you have already created a
"Recovery Media", you can use it to restore the
recovery partition.
Simply follow the instructions in "Restoring the
preinstall software from your creating Recovery
Media" section in this manual. You will be
directed to select Restore Original Factory Image
from the drop-down menu. If you have not
created Recovery Media, please contact
TOSHIBA support for assistance.
Satellite C650/C650D, Satellite Pro C650/C650D
8-13