Toshiba PSC16C-02500M User Manual page 121

LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet ( Magic packet ) from the LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "Allow the device to wake the computer" check box within the LAN
Device properties. ( This feafure does not effect the Wake-up on LAN
from sleep or hibernation. )
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network. The following
settings can be changed when the Built-in LAN is Enabled. Connect the
AC adaptor when using the Wake-up on LAN function. The battery
retention time will be shorter than the times listed in this manual when this
function is enabled. Refer to the section in chapter 6,
Power
Enabled
Disabled
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Disabled
User's Manual
off.
Enables Wake-up on LAN from shutdown.
Disables Wake-up on LAN from shutdown.
(Default)
Enables built-in LAN functions. (Default)
Disables built-in LAN functions.
Satellite C650/C650D, Satellite Pro C650/C650D
Retaining Data with
7-5