Df1, Df2, Df3 Board And Gf1 Board Removal; Replacing The Inverter Connector Assembly - Sony KDL40V3000 - 40" LCD TV Service Manual

1-8. DF1, DF2, DF3 BOARD AND GF1 BOARD REMOVAL

1
Remove 5 screws, +PSW 3SG
(KDL-46V3000 only)
2
Disconnect 3 connectors
(KDL-46V3000 only)
3
Disconnect 4 connectors
(KDL-40V3000)
Disconnect 4 connectors
(KDL-46V3000/46VL130)
4
Remove 4 screws, +PSW 3SG
5
Disconnect 7 connectors
6
Remove 4 screws, +PSW 3SG

1-8-1. REPLACING THE INVERTER CONNECTOR ASSEMBLY

Use the following procedure to confirm that the connector is securely attached to the Inv
1
After inserting the connector
into the Inverter board,
push the middle section
of the inverter connector to
lock on the terminal.
KDL-40V3000/46V3000/46VL130
DF1 Board(KDL-40V3000)
DF2 Board(KDL-46V3000/46VL130)
DF3 Board(KDL-46V3000/46VL130)
2
1
DF3 Bracket
(KDL-46V3000/46VL130)
2
Push the right section of
the inverter connector and
confirm it is securely
connected.
KDL-40V3000/46V3000/46VL130
5
3
4
3
Push the left section of
the inverter connector and
confirm it is securely
connected.
6
GF1 Board
G/D Bracket
16