Table of Contents
Advertisement
3. Remove the old battery.
Figure 22. Removing the old battery
4. Install a new battery.
Figure 23. Installing a new battery
5. Close the computer cover and connect the cables. See "Completing the parts
replacement" on page 36.
Note: When the computer is turned on for the first time after replacing the
battery, an error message might be displayed. This is normal after
replacing the battery.
6. Turn on the computer and all attached devices.
7. Use the Setup Utility program to set the date, time, and any passwords. See
Chapter 4, "Using the Setup Utility," on page 49.
Chapter 2. Installing options and replacing hardware
27
Advertisement
Table of Contents
