2.1
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW248TLB Series LED monitor is specially designed
for VESA wall mount.
To detach the arm/stand:
1.
Lower the monitor to its lowest height, and then inset the monitor height
adjustment lock.
2.
Have the front of the monitor face down on a table.
3.
Use a screwdriver to remove the two screws on the VESA cover,the slide out
the arm/base to detach it from themonitor.
•
W e recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
•
Hold the stand of the monitor when you remove the screws.
•
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
•
Use only the UL Listed Wall Mount Bracket with minimum weight/load 20
Kg (Screw size: M4 x 12 mm).
ASUS LED Monitor VW248TLB Series
2-1