Asus WMT-LX User Manual page 20

14)Power Supply Connectors (20-pin block ATXPWR)
These connectors connect to an ATX 12V power supply. Each plug from
the power supply will only insert in one orientation because of the dif-
ferent hole sizes. Find the proper orientation and push down firmly mak-
ing sure that the pins are aligned. An auxiliary power supply may be
needed depending on your system configuration.
IMPORTANT:
recommended wattage: 230 watts; 300W for a fully-configured system)
can supply at least 20 amperes on the +5-volt lead and at least 720mA on
the +5-volt standby lead (+5VSB). Your system may become unstable/
unreliable and may experience difficulty in powering up if your power
supply is inadequate. For Wake-On-LAN support, your ATX power sup-
ply (minimum recommended wattage: 230watts) must supply at least
720mA +5VSB.
Top:
RJ-45
WMT-LX
WMT-LX ATX &
Auxiliary Power Connectors
20
+001-023 WMT-LX.p65 copy
(6-pin AUXPWR)
(4-pin ATX12V)
Make sure that your ATX 12V power supply (minimum
HP WMT-LX Manual
20
ATX12V
COM
Pin 1
ATXPWR
COM
Pin 1
+12.0VDC
+5.0VDC
+5VSB
+5.0VDC
PWR_OK
-5.0VDC
COM
COM
+5.0VDC
COM
COM
COM
+5.0VDC
PS_ON#
COM
COM
+3.3VDC -12.0VDC
+3.3VDC +3.3VDC
3/23/01, 9:32 AM
+12V DC
+12V DC